Home page

CD11ME

Features:Ultra low impedance, high stability, long life Endurance:105℃8000-10000hours Voltage Range:10~120V Capacitance Range:0.47-18000μF Operating Temperature Range:-40 to +105℃

Key words:

SMD, LEAD, BOLT, SOLID STATE CAPACITORS

Classification:

Product accessories:

Hotline:

+86-513-8669 1579

E-mail:

yhy@sanxidz.com

Consulting

CD11ME

Details Introduction

Endurance with ripple current :105℃ 8000-10000 hours

Low resistance, long life, high stability

Designed for the LED lamp, the design of driving source LED

RoHS Compliant

SPECIFICATIONS

Items	Characteristics
Category Temperature Range	-40 to +105℃
Rated Voltage Range	6.3 to 100Vdc
Nominal capacitance range	1-18000ｕＦ
Capacitance Tolerance	±20%(M) (at 20℃, 120Hz)
Leakage Current	After 1minutes at20℃application of rated voltage,leakage current is not than 0.01cv or 3 ,whichever is greater
Dissipation Factor (tan δ)	UR (Vdc)	6.3	10	16	25	35	50	63	80	100
	tanδ (Max.)	0.20	0.18	0.14	0．12	0.10	0.09	0．08	0.065	0.065
	When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increas (at 20℃, 120Hz)
Temperature Characteristics	UR (Vdc)	6.3	10	16	25	35	50	63	80	100	(at 120Hz)
	Z(-25℃)/Z(+20℃)	3	2
	Z(-40℃)/Z(+20℃)	6	4	3
Load life	Test conditions duration After applying rated voltage for 8,000-10,000hours at +105℃ and then resumed for 16 hours Capacitance change:±25% o f the initial measured value 2minutes Leakage current: ≤the initial specified value Dissipation factor ≤ 2times of the initial specified value
	ɸD									Load life
										10v	16-100v
	ɸD≤6.3									4000	8000
	ɸD=10									6000	10000
	ɸD≥12.5									8000	10000
Shelf Life	The following specification shall be satisfied when the capacitors are restored to 20°C after exposing them for 1,000 hours at 105°C, without voltage applied.
	Capacitance change	20%of the initial value
	D.F. (tanδ)	200%of the initial specified value
	Leakage current	200%The initial specified value

Dimensions [mm]

ØD	5	6.3	8		10	12.5	16	19
Ød	0.5	0.5	0.5	0.6	0.6	0.8	0.8	1.0
F	2.0	2.5	3.5		5.0	5.0	7.5	7.5
ØD'	ØD+0.5max.
L'	L（≥20）+2max .L（＜20）1.5max L+2max.

ØD	5	6.3	8		10	12.5	16	19
Ød	0.5	0.5	0.5	0.6	0.6	0.8	0.8	1.0
F	2.0	2.5	3.5		5.0	5.0	7.5	7.5
ØD'	ØD+0.5max.
L'	L+2max.

Frequency Coefficient

Hz	50(60)	120	1K	10K	100K
Cap (uF)	50(60)	120	1K	10K	100K
0.47-560	0.80	0.40	0.75	0.90	1.00
680-1800	0.80	0.50	0.85	0.94	1.00
2200-3900	0.80	0.60	0.87	0.95	1.00
4700-18000	0.80	0.75	0.90	0.98	1.00

The endurance of capacitors is shorted with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced.

STANDARD RATINGS

WV (Vdc)	Cap (µF)	Case size ΦD×L(mm)	ESR 100KHzῼ (20℃)	Ripple current (Arms/105℃,120Hz)
6.3(v)	150	5×11	0.57	2000
	330	6.3×11	0.21	350
	680	8×11	0.13	660
	820	10×12.5	0.080	870
	1000	8×16	0.086	850
	1200	10×16	0.060	1230
	1500	10×20	0.046	1400
	1800	12.5×16	0.049	1450
	2200	10×25	0.042	1650
	2700	10×30	0.030	1920
	3300	12.5×20	0.035	1910
	3900	12.5×25	0.026	2230
	5600	16×20	0.027	2530
	6800	16×25	0.020	2930
	8200	16×30	0.017	3450
	10000	19×25	0.019	3140
	15000	19×35	0.014	4220
	18000	19×40	0.012	4300
10(v)	100	5×11	0.57	200
	220	6.3×11	0.21	350
	330	6.3×11	0.17	470
	470	8×12	0.13	660
	680	8×16	0.086	850
	1000	10×16	0.060	1230
	1200	10×20	0.046	1400
	1500	10×20	0.042	1650
	2200	10×20	0.035	1910
	3300	12.5×20	0.026	2230
	4700	16×25	0.018	2790
	6800	16×30	0.060	3450
	8200	16×30	0.046	3610
	10000	16×40	0.042	4100
16(v)	47	5×11	0.57	140
	100	5×11	0.57	200
	220	6.3×11	0.21	350
	330	8×12	0.13	660
	470	8×12	0.087	800
	1000	10×16	0.046	1400
	2200	12.5×20	0.027	2230
	3300	16×25	0.020	2880
	4700	16×30	0.017	3450
25(V)	47	5×11	0.57	200
	100	6.3×11	0.21	350
	220	8×12	0.13	660
	330	8×12	0.086	800
	470	10×16	0.060	1230
	680	10×16	0.049	1450
	1000	10×20	0.030	1920
	1200	10×20	0.043	2200
	1500	12.5×20	0.026	2230
	1800	16×20	0.027	2470
	2200	12.5×25	0.020	2880
	3300	16×25	0.017	3250
	3900	19×25	0.015	4120
	4700	19×30	0.014	4220
	5600	19×30	0.012	4300
35(v)	33	5×11	0.57	200
	47	5×11	0.21	350
	100	8×12	0.13	660
	220	10×13	0.086	800
	330	10×16	0.060	1230
	470	10×16	0.046	1400
	560	10×20	0.042	1650
	1000	12.5×20	0.026	2130
	1500	12.5×25	0.020	2680
	2200	16×25	0.017	3140
	3300	16×30	0.013	3900
	4700	19×30	0.010	4480
50(v)	1	5×11	0.30	35
	2.2	5×11	0.17	53
	3.3	5×11	0.12	65
	4.7	5×11	0.090	82
	10	5×11	0.12	100
	22	5×11	0.084	125
	33	6.3×11	0.058	200
	47	6.3×11	0.055	300
	68	6.3×11	0.055	340
	100	8×12	0.043	560
	220	10×16	0.061	900
	330	10×16	0.045	1080
	470	12.5×20	0.034	1650
	680	16×25	0.030	2310
	1000	16×25	0.025	2560
	2200	19×30	0.017	3680
	2700	19×35	0.014	3800
63(v)	22	5×11	1.8	180
	33	6.3×11	1.0	230
	47	8×12	0.50	310
	68	6.3×11	0.40	315
	100	8×14	0.36	408
	220	10×16	0.16	750
	330	12.5×20	0.096	1150
	470	12.5×20	0.055	1650
	680	16×25	0.047	1760
	1000	16×25	0.035	1960
80(v)	10	6.3×11	0.63	210
	22	8×12	0.54	360
	33	8×12	0.33	508
	47	8×12	0.31	593
	100	10×16	0.11	760
	220	12.5×20	0.063	1260
	330	12.5×25	0.057	1800
	470	16×25	0.042	1950
	1000	19×25	0.033	2345
100(v)	10	6.3×11	1.0	126
	22	6.3×11	0.5	260
	33	8×16	0.38	300
	47	10×12	0.34	450
	68	10×16	0.25	400
	100	10×12.5	0.15	560
	220	12.5×20	0.077	1230
	330	16×25	0.060	1550
	470	19×25	0.040	1980

CD288N

CD11MB